• Sata Hard Drives For Sale
• Sata Hard Drive Connections

Contents. Installing Windows XP on a PC already with Windows Vista, Windows 7, or Windows 8 If you follow these instructions, you should be able to add Windows XP to a system that already has a newer version of Windows installed – with minimal headache and no loss of data. Prepping the Machine for an XP Installation The first thing to do is to get your system ready for installing Windows XP. There are a couple of things you need to do: Do you already have a free partition or a separate physical disk that you can install Windows XP to?

This video shows you how to download Java to your computer. This is great for computer administrators as you. Java 1.6 jre download. Shawn demonstrates how to download and install the Java JDK and JRE as well as how to change the path.

Sata Hard Drives For Sale

If so, skip on to the next section. Download or use a commercial partition editor, and boot into it. Use the partition manager to shrink the partition with Windows Vista/7 to make enough room at the end of the drive for Windows XP. Add a new partition located after the Windows Vista/7 partition you just shrunk. Make sure it has been formatted as NTFS.

To load Windows XP onto a SATA drive you need to proceed as follows: At the Windows Setup Screen (this should be the second screen after installation starts) you should see, at the bottom of the screen, a message saying: “Press F6 if you need to install a third party SCSI or RAID driver.” At this point press.

It doesn’t need to be primary, and should not be active. Reboot into the Windows XP setup CD It’s very important to make sure that this partition was created at the end of the drive, or else you might no longer be able to boot into Windows because your partition numbers and offsets have changed. Installing Windows XP If you’re installing Windows XP to a separate physical drive, do not disconnect the Windows Vista or Windows 7 drive, and do not change the drive boot order in the BIOS. This will not help and will make it terribly difficult to get your dual-boot working again! You cannot install Windows XP by running the installer from within a newer version of Windows, instead, you’ll have to boot from the CD:. Make sure your BIOS is configured to boot from the CD.

Some computers also let you press F8 to pick where you want to boot from – you may use that option instead. Put your Windows XP CD in the drive and press a key when you see the “Press any key to enter Windows Setup” message. If you’re installing Windows XP to a SATA drive, make sure you hit F6 to load the SATA drives. When you’re presented with a screen that has a list of hard drives and partitions, use the arrow keys to select the empty NTFS partition you created in the previous section, then press ‘Enter’ to continue. Let Windows XP setup finish. It will reboot several times – do not interrupt it.

Setting up the Dual-Boot Once Windows XP setup has finished, it’ll automatically boot you into the newly installed copy of Windows XP – note that you will not be able to boot into Vista/7 at this point, nor will you see a boot menu option for it. This is because Windows XP has installed its own bootloader on top of the Windows Vista bootloader, and it does not recognize newer versions of Windows. Once in Windows XP, download and install. Download and install. Once in EasyBCD, go to the “Bootloader Setup” page, and select “Install the Windows Vista/7 bootloader to the MBR” then “Write MBR” to get the EasyBCD bootloader back.

EasyBCD adding WinXP entry. Now reboot.

You won’t be able to select the drive that your Windows XP entry points to. This is because EasyBCD will automatically search for NTLDR, the Windows XP bootloader, and pick the right drive for you. For more information, read the main page.

Sata Hard Drive Connections

Don’t try changing this yourself, your system will not boot if you do! Finishing Up. If all has gone well (assuming you followed the directions here to a tee, there is no reason for it not to have), you should be presented with the EasyBCD boot menu when you restart your machine.

You’ll have the old Windows Vista/7 entry and the new Windows XP entry you created in the steps above. Selecting each should get you into the respecting operating system without a problem. Feel free to run EasyBCD in either OS and customize your dual-boot by renaming entries, changing the default OS, and modifying the menu timeout. Grab yourself a copy of from the “Useful Utilities” page – it’s free and you’ll love it. Troubleshooting Please see the the page for answers to any issues you might have.

Adding a secondary SATA drive to your office computer is a great way to expand your data storage capacity and increase security at the same time. Anything that you store on a secondary hard drive remains unaffected in the event that your primary Windows drive becomes unbootable or fails. Unlike older IDE drives, SATA disks have no jumpers and it's not necessary to configure a master/slave relationship between them. As long as you have a Windows drive installed in the system, your computer will recognize the additional drive as a secondary.